|
|
| Equipment Designed For Testing The Penetration Of Asphalt. |
  |
Universal Penetrometer |
|
Data Sheet for:
Model TO-512
|
In this test, a chosen force is applied over a given area for a known period of time and the depth of penetration or the depression made in the sample is measured in tenths of a millimeter which is expressed as a penetration number. The display and penetration arm are adjustable to permit the testing of samples immersed in a thermostat bath.
|
|
 |
Penetration Cone |
|
Data Sheet for:
Model TO-515
|
This cone is used for empirical estimation of the consistency of lubricating grease and petroleum. It is made of brass with a hardened steel tip. The stem of the cone is interchangeable with all types of Tinius Olsen Penetrometers manufactured to close tolerances, providing a unified cone and ensuring that there is no shoulder between the tip and the body.
|
|
 |
Bitumen Penetration Kit |
|
Data Sheet for:
Model TO-518
|
The Tinius Olsen Bitumen Penetration Kit consists of a Penetration Needle, transfer Dish and Aluminium Sample Containers.
|
|
|
 |
Pavement Dynamic Core Penetrometer |
|
Data Sheet for:
Model TO-551-1
|
The Pavement Dynamic Cone
Penetrometer (DCP) is a very robust instrument, designed for rapid in-situ evaluation of strength of sub- grade and the bases for roads and runway
pavements. Continuous measurements can be made down to a depth of 800 mm, or when an extension is fitted, to a depth of 1200 mm. Where pavement
layers have different strengths, the boundaries can be identified and the thickness of the layers determined.
|
|
|
|
|
|
